Color Steel Rain CoverIt Is Made By Pressing Color Steel Plates, And The Color Steel Plate Coating Is A Product Made Of Cold-rolled Steel Plates, Galvanized Steel Plates, Surface Chemical Treatment, Coating (roll Coating) Or Composite Film (PVC Film, Etc.), And Then Baked And Cured. Some People Also Refer To This Product As "pre Roll Coated Color Steel Plate" Or "plastic Color Steel Plate". Rain Cover Is Made By Pressing Color Steel Plate, And The Color Steel Plate Coating Is Made Of Cold-rolled Steel Plate, Galvanized Steel Plate, Surface Chemical Treatment, Coating (roller Coating) Or Composite Film (PVC Film, Etc.), And Then Baked And Cured To Make The Product. Some People Also Refer To This Product As "pre Roll Coated Color Steel Plate" Or "plastic Color Steel Plate". The Main Colors Include Sea Blue, White Gray, Red, And Other Customized Colors.
When Choosing A Protective Cover, Attention Should Be Paid To Selecting The Correct Indoor Or Outdoor Protective Cover According To The Installation Location. The Main Function Of Indoor Protective Covers Is Dust Prevention, While Outdoor Protective Covers, In Addition To Dust Prevention, Mainly Protect Cameras From Working Normally In Various Harsh Natural Environments Such As Rain, Snow, Low Temperature, High Temperature, Etc. Therefore, Outdoor All-weather Protective Covers Not Only Have Strict Sealing Structures, But Also Multiple Functions Such As Wipers, Sprinklers, Heating And Cooling. This Determines That The Price Of Outdoor Protective Covers Is Much Higher Than That Of Indoor Protective Covers. It Should Be Noted That In Some Areas, The Temperature Changes Little Throughout The Year And Is Within The Working Temperature Range Of The Camera. Therefore, Ordinary Outdoor Protective Covers Without Constant Temperature Function Can Be Used To Reduce Costs. Choose Protective Covers Of Appropriate Size. The Size Of The Protective Cover Should Be Greater Than The Sum Of The Camera And Lens Sizes, Otherwise The Camera And Lens Cannot Be Installed. If Choosing A Protective Cover With Constant Temperature Function, Consideration Should Be Given To The Power Supply Of The Protective Cover; Choose A Protective Cover With Wiper Function. If There Is A Decoder, It Can Be Controlled Through The Decoder. If There Is No Decoder, Consider Adding A Relay To Control It.
Conveyor Rain Covers Are Lightweight, Aesthetically Pleasing, And Have Good Corrosion Resistance. They Can Also Be Directly Processed, Providing A New Type Of Raw Material For Industries Such As Construction, Shipbuilding, Vehicle Manufacturing, Furniture, Electrical Appliances, And Mining. They Have Good Effects Such As Replacing Wood With Steel For Construction, Saving Energy, And Preventing Pollution. The Color Coated Steel Plate Using Galvanized Steel Plate As The Substrate Is Coated With Zinc Protection, And The Coating On The Zinc Layer Plays A Role In Covering And Isolating, Which Can Prevent The Steel Plate From Rusting. Its Service Life Is Longer Than Galvanized Steel Plate. It Is Reported That The Service Life Of Coated Steel Is 50% Longer Than That Of Galvanized Steel Plate. Generate Lateral Thrust To Automatically Center The Belt Towards The Center, Achieving The Purpose Of Adjusting Belt Deviation. It Is Generally Reasonable To Use This Method When The Total Length Of The Rain Cover Of The Belt Conveyor Is Short Or When The Rain Cover Of The Belt Conveyor Runs In Both Directions, Because The Rain Cover Of The Shorter Belt Conveyor Is Prone To Deviation And Difficult To Adjust. Try Not To Use This Method For The Rain Cover Of The Long Belt Conveyor, As The Use Of The Self-aligning Roller Group Will Have An Impact On The Service Life Of The Belt.
The Cold-rolled Steel Plate Used For The Color Steel Rain Cover Is Degreased, Phosphated, And Treated With Chromium Salts. It Is Then Subjected To Double-sided Hot-dip Galvanizing Under Nitrogen Protection, Followed By The Application Of A Chemical Conversion Film That Is Easy For The Primer To Firmly Adhere To. Then, An Epoxy Resin Primer Is Applied, And Finally, A Chemically Corrosion-resistant Color Topcoat Is Applied. This Type Of Color Steel Plate Rain Cover Is Lightweight, Aesthetically Pleasing, And Has Good Corrosion Resistance, Providing Protection For Enterprises Such As Mines, Cement Plants, Power Plants, Paper Mills, Steel Plants, Sand And Gravel Quarries, Limestone Yards, Garbage Disposal Sites, Ports, Docks, Coal Mines, And Chemical Plants. It Has Achieved Good Results Such As Replacing Wood With Steel, Efficient Construction, Energy Conservation, And Pollution Prevention. At Present, Multiple Varieties Of Color Steel Rain Covers Have Been Developed, Including Single-layer Color Steel Plates, Sandwich Color Steel Plates, And Sandwich Color Steel Plates With Polyethylene And Rock Wool Color Steel Plates. Color Steel Rain Covers Are Also One Of Them. In Recent Years, With The Further Expansion Of The Use Of Color Steel Plates, Users' Requirements For Color Steel Plates Are Also Constantly Increasing. Color Steel Plates Are Made Of Cold-rolled Steel Plates, Which Are Degreased, Phosphated, And Treated With Chromium Salts. They Are Then Double-sided Hot-dip Galvanized Under Nitrogen Protection, Coated With A Chemical Conversion Film That Is Easy For The Primer To Adhere Firmly, And Then Coated With Epoxy Resin Primer. Finally, They Are Coated With A Chemically Corrosion-resistant Color Surface Paint.
